Free Project: Shabby Chic Peony Bouquet
With the anticipation of spring just around the corner and Mother's Day along with it, channel those vibes by making a beautiful bouquet of shabby chic pastel peonies from polymer clay with long fl owing leaves to set the scene for those hazy summer days ahead.
Find this skilled project in DHMS March 2019:
Mother's Day Project:
Shabby Chic Peony Bouquet
You will need:
Polymer clay: white, pink, yellow and orange
Acrylic paint: lime green, light grey and white
1 x 1/12th Scale miniature glass vase or jug
1mm gauge, green paper coated floristry wire
Strong craft glue
10-20mm Double sided tape
Material in a pastel shade of your choice
Tissue paper in a pastel shade of your choice
String or twine
Round tipped embossing tool
Hand or electric drill with a chuck
0.5-1mm drill bit
1 x 1.5cm diameter miniature bowl (for assembling the flowers in)
1 Create a peach colour of clay by mixing a pea-sized piece of white polymer clay with a little pink and orange. Take another piece of white clay and mix with a little pink to create pale pink.
2 Take both the peach and the pink clays then cut and shape each into a batch of small oval petals roughly measuring 7mm in length. Use a pokey tool to lightly texture the end of each petal, as pictured.
3 Carefully construct your petals into peony flowers by placing them in a miniature bowlmeasuring 1.5mm in diameter. Use roughly ten petals per fl ower and create two in peach and one in pink, as pictured.
4 Take yellow clay and roll into three 4mm balls. Lightly flatten and apply one ball to the centre of each fl ower. Use a pokey tool to heavily texture the yellow centre of each flower, as pictured. Bake the finished peonies as recommended.
5 To create the stems use a drill to carefully create a shallow hole in the back of each fl ower, be careful not to drill a hole all the way through. Glue a piece of green floristry wire into the back of each peony to create flower stems, as pictured. Leave to dry completely.
6 For the leaves take a small piece of thin paper, roughly 15cm x 7cm and cover the surface with lengths of doublesided tape to make it adhesive. Use wire cutters to cut ten 8cm - 10cm lengths of green floristry wire. Apply the wire to the adhesive paper, exactly as pictured.
Lynn's Top Tip!
“This is a little tip that may seem obvious but will help a lot. When making tiny delicate flowers such as the ones in this project, try not to handle the clay too much. Once you have arranged your petals into a flower and you need to move it, simply use a pokey or embossing tool to pick it up from the center of the flower instead of using your fingers, to avoid squashing the petals together..”
7 Take another piece of 15cm x 7cm thin paper and place it directly on top of the piece that was constructed in step 6 so that the wires become encased in paper. Use scissors to cut the encased wires into a variety of long thin leaves, as pictured.
8 Use a small piece of sponge to apply lime green paint to both sides of each leaf. Again, using sponge, apply small dabs of grey paint over the lime green to achieve a shabby chic appearance, as pictured. Leave the leaves to dry upright in a piece of sponge.
9 Take all flowers and leaves and use a sponge to lightly stipple a little white paint onto the tips of each leaf and over the flower petals, as pictured, to accentuate the shabby chic feel.
10 Arrange your bouquet; trim, bend and construct your fl ower arrangement into a piece of sponge until you are happy with how it all looks. Once happy with your bouquet, use a piece of string or twine to tightly tie all stems together at the base. Remove from the sponge and use wire cutters to trim any excess wire.
11 Take the glass vase or jug and half fi ll it with a small piece of scrunched tissue paper. Take another piece of tissue paper and cut into a 5cm x 5cm square, place the square over the jug and gently push the center of it down into the jug. Take the bouquet and dip the tied end in glue, then push into the tissue paper lined jug and position as desired, leave to dry.
12 Take a piece of material and cut into a 6cm x 6cm square then fray the edges. Use double-sided tape to stick and fold the material diagonally off-center. Use another piece of tape to position the fl owers as desired, and then scatter any left over petals from step 2.
Looking for more marvellous miniature inspiration? Pick up your copy of Dolls House and Miniature Scene today!
Did you love this project? If you're feeling like trying something new, we've got a gorgeous cake decorating tutorial for you, showing you how to create wafter paper flowers for Mother's Day! Click here to see more!